1.Care and treatment of natural stones such as granite, marble, sandstone, etc., to prevent stone from becoming diseased.
2.Impregnation of highly absorbent inorganic aggregates: such as perlite boards, roof tiles, cement tiles, high-rise building light brick facings, asbestos, inorganic fabrics, thermal insulation materials, etc., to make them have significant waterproof and moisture-proof effects.
3.Waterproof and dampproof of roofs, internal and external walls, bathrooms, kitchens, basements and warehouses, and anti-penetration of reinforced concrete structures.
1. Waterproofing is generally applied after the building is molded. It is necessary to remove floating ash, oil stains and other foreign matter from the base material surface and repair defects.
2. Please allow the substrate to dry completely before application to get the best results. For substrates that have already been surface-modified or contaminated, the effect may be affected.
3. Mix this product with appropriate dilutions and auxiliary agents in the predetermined ratio, seal and prepare evenly. Before carrying out large-area construction, small-area testing must be carried out.
4. Use brush, paint or spray to apply waterproofing to the substrate surface, making sure the substrate surface is sufficiently moist and absorbent.
5. After painting, leave the paint in a ventilated place at room temperature for 16 to 24 hours (48 hours is best). Do not allow the substrate to come into contact with water before the protective effect is achieved. The reaction time depends on the amount of paint and the environmental temperature.
Disclaimer: Datas in this document are based on our knowledge and necessary testing. The product may satisfy all claims of the documents under appropriate conditions of use. We do not guarantee the data and performance of our products under various real-world conditions. We recommend that users conduct necessary tests in their own laboratory or field to evaluate the products if satisfy their requirements.
